DIY Trellis for terrace and balcony

To build 1m2 you need an estimated 16pcs (gap size 11.4×11.4cm)
22 pcs gives a square trellis 139×139
18 pcs gives a diagonal trellis 176×96

BSH glued laminated timber, Scandinavian spruce.
TanalithE pressure impregnation.

SKU: config019051 Category:


Available sizes:

h100 x 180 cm

h180 x 90 cm

h180 x 120 cm

h180 x 180 cm



– frame: 34 x 44mm,

– gap size: 23mm (between slats),

– slat size: 20 x 9mm with rounded edges,

– compatible with fence posts (we also recommend: metal post holders, l-brackets and finials)



Liveoutside garden products are committed to innovative product development and manufacturing. Our products are manufactured to the highest standards. Advanced treatment process with permanent wood preservative provides complete protection against rot and insect attack for up to 10 years. Please notice that 10 years guarantee applies only to products which have no contact with the ground. Otherwise durability of the wood is reduced.


Pressure treatment

Our trellis is pressure treated and impregnated with TANALITH E, which is essentially a waterborne product based on copper triazole technology produced by Arch Timber Protection a trusted name in wood preservation. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated wood with normal wood preservative in any colour. Please note that if TANALITH pressure treated timber is cut, drilled or notched it is recommended that you apply an approved cut end treatment to the affected area as failure to do so may result in a reduction in the effectiveness of the treatment.

Jagram Ltd is a trade only supplier. If you are in the trade and want to make contact, please call us on +48797250884 or use the form.


Unit 12
Westway Business Centre

Telephone: +48797250884*

*no stock held at this address



    Your Shopping cart